Exposure 3510 Stereo Power Amplifier
The Exposure 3510 Stereo Power Amplifier is a 110W audiophile stereo power amplifier for music lovers partnering serious loudspeakers.
Musical power with substance
The Exposure 3510 is rated at 110W per channel into 8 ohms, giving generous headroom and confident control over modern loudspeakers. That power is backed by a high-capacity custom-made toroidal power transformer and substantial power supply capacitors, so musical peaks arrive with authority rather than strain.
As an Exposure stereo power amplifier, the focus is on timing, clarity and long-term musical involvement rather than hi-fi pyrotechnics. Clean, extended low-frequency performance helps bass lines feel tuneful and articulate, while midband detail and treble textures emerge from a quiet, stable background.
For anyone comparing audiophile stereo power amplifier options or shortlisting the best high-end stereo power amplifier candidates, the Exposure 3510 Stereo Power Amplifier offers a compelling blend of grip, scale and musical flow.
Designed to drive difficult speakers
The Exposure 3510 Stereo Power Amplifier is explicitly described as ideal for driving difficult speaker loads in bi-amping mode with the 3510 Integrated Amplifier. That capability reflects the strength of its power supply and output stage, making it a natural partner for revealing, low-sensitivity or complex-impedance loudspeakers.
Used with high-end speakers, the Exposure 3510 power amplifier keeps bass lines controlled and tuneful, supporting the speaker’s character rather than dominating it. Channel separation better than 60dB from 20Hz to 20kHz, combined with a signal-to-noise ratio better than 100dB (referenced to rated output), supports a wide, stable stereo image and fine low-level detail.
Thoughtful engineering, purposeful construction
Beneath the understated fascia, the Exposure 3510 Stereo Power Amplifier uses high-quality capacitors in the signal path and a carefully specified power supply. A frequency response of 20Hz–20kHz (±0.5dB) and total harmonic distortion below 0.015% at rated output help keep the presentation neutral and transparent, avoiding any obvious tonal imprint.
Full aluminium casework and an extruded front panel are employed to control resonance and stray electromagnetic fields. This contributes both to mechanical stability and to the measured performance, while also giving the amplifier a solid, reassuring feel on the rack.
Finishes in black or titanium allow the amplifier to blend easily into different systems and interiors, while dimensions of 115mm (H) x 440mm (W) x 300mm (D) make it straightforward to accommodate in a typical hi-fi rack.
Everyday reliability, long-term confidence
The Exposure 3510 Stereo Power Amplifier is designed for long-term ownership. Mains compatibility of 110/120V or 220/240V at 50/60Hz (factory set) means it can be specified correctly for your region, and typical power consumption is under 400W with both channels driven into 8 ohms.
Compatibility and system matching
With an input impedance of 18kΩ and input sensitivity of 1.85V at 1kHz, the Exposure 3510 Stereo Power Amplifier partners naturally with a wide range of quality preamplifiers and source components. Any preamp able to deliver a standard line-level output near 2V will comfortably drive it to full power.
The amplifier is particularly well suited to partnering the Exposure 3510 Integrated Amplifier in bi-amping configurations, creating a powerful Exposure stereo power amplifier stack that retains a consistent sonic character from preamp to power stage. It can also anchor systems built around high-quality DACs or phono stages feeding a dedicated preamplifier.
Setup, placement and practical tips
Place the Exposure 3510 Stereo Power Amplifier on a stable, level surface with good ventilation above and around its aluminium casework. Allow space at the rear for cables and avoid enclosing it in unventilated cupboards, as any high-power amplifier benefits from free airflow.
Connect loudspeakers using high-quality speaker cable of appropriate gauge and keep runs reasonably short where practical. Always power the amplifier down before changing speaker or interconnect connections.
When integrating the amplifier into a system, start with moderate gain on your preamplifier and gradually increase listening levels to understand how the 110W power delivery interacts with your room and loudspeakers. Matching with well-designed speakers and a neutral preamp will showcase the amplifier’s control, especially in rooms where bass can otherwise become loose.
About Exposure
Exposure has spent decades focused on the art of music reproduction, designing electronics that prioritise timing, coherence and long-term musical enjoyment over showy effects. Based in Britain, the company has refined its approach across generations of amplifiers, continually improving power supplies, layouts and casework while keeping the user experience refreshingly straightforward.
The 3510 series draws on this heritage, bringing Exposure’s approach to a contemporary range of integrated and power amplifiers.
Specifications
FAQs
How powerful is the Exposure 3510 Stereo Power Amplifier?
The Exposure 3510 Stereo Power Amplifier delivers 110W per channel into 8 ohms at 1kHz, giving substantial headroom for realistic listening levels. Combined with a robust power supply and high-quality components in the signal path, that power translates into confident control and clean dynamics, making it a serious audiophile stereo power amplifier rather than a simple spec-sheet upgrade.
What are the key specifications of the Exposure 3510 Stereo Power Amplifier?
Key Exposure 3510 Stereo Power Amplifier specifications include 110W per channel into 8 ohms at 1kHz, frequency response of 20Hz–20kHz (±0.5dB), total harmonic distortion below 0.015% at rated output and a signal-to-noise ratio better than 100dB. Channel separation exceeds 60dB across the audio band, with 18kΩ input impedance and 1.85V input sensitivity at 1kHz.
How should I integrate the Exposure 3510 Stereo Power Amplifier into my system?
The Exposure 3510 Stereo Power Amplifier partners naturally with a quality preamplifier or the matching 3510 Integrated Amplifier in bi-amping configurations. Use a preamp capable of delivering around 2V line level to reach full power, and pair it with revealing but well-balanced loudspeakers. This combination lets the high-end stereo power amplifier architecture show its strengths in timing, bass control and musical coherence.
What makes the Exposure 3510 Stereo Power Amplifier different from other high-end stereo power amplifiers?
The Exposure 3510 Stereo Power Amplifier combines honest 110W per channel output with a clean 20Hz–20kHz response and distortion below 0.015% at rated output, wrapped in solid aluminium casework. Rather than relying on complex features, it focuses on power supply quality, signal-path components and practical engineering, offering a straightforward route to high-end stereo power amplifier performance that feels purposeful rather than fussy.
