Exposure 3510 Integrated Amplifier
The Exposure 3510 integrated amplifier is a 110W stereo integrated for music lovers seeking a powerful yet refined system hub.
Why the Exposure 3510 integrated amplifier belongs in your system
In a single, beautifully engineered chassis, the Exposure 3510 integrated amplifier combines serious power, upgrade flexibility and classic British tuning. Rated at 110W per channel into 8 ohms, it has the current drive to take control of modern loudspeakers while preserving the natural timing and flow that Exposure is known for.
For many music lovers comparing high-end integrated amplifiers, this model offers the simplicity of a one-box solution with the tonal sophistication usually associated with separate pre and power amplifiers. Whether you’re building a first serious system or refining an established setup, the Exposure 3510 stereo integrated amplifier gives you a stable, upgradeable foundation.
Power with grip and musical drive
Behind the understated front panel, the Exposure 3510 integrated amplifier delivers 110W per channel at 1kHz into 8 ohms, with total harmonic distortion below 0.03% at rated output. That combination of power and low distortion translates into confident dynamics, firm bass lines and spacious soundstaging, even with demanding loudspeakers.
A fast bipolar transistor output stage is employed specifically for dynamic and vivid performance, allowing transients to start and stop cleanly without smearing detail. Cascode circuitry is used for improved power supply immunity, helping preserve clarity and separation across complex musical passages.
Analogue connectivity with digital and phono upgrade paths
Out of the box, the Exposure 3510 integrated amplifier offers six line-level inputs, giving generous capacity for streamers, CD players, TV audio, external DACs and more. Input impedance is specified at a minimum of 17k ohms with 250mV sensitivity, ensuring compatibility with a wide range of modern sources.
For vinyl enthusiasts who value an integrated amplifier with phono stage, there is an internal slot for an optional MM or MC phono module. Alternatively, you can specify a plug-in DAC option, creating an elegant, compact hub for digital sources. The design allows one of these modules to be fitted, giving you a clear upgrade path as your system evolves.
A separate pre-amplifier output is provided, so you can integrate matching Exposure power amplifiers or active subwoofers later, while still enjoying the 3510 as a control centre. This makes it particularly attractive for anyone planning a staged system build with Exposure Electronics 3510 integrated amplifier-based separates.
Engineering that serves the music
Inside, the Exposure 3510 integrated amplifier uses high-quality capacitors in the signal path and a uniquely tuned short signal and power-supply PCB layout, designed to minimise interference and maintain purity. Cascode stages help isolate sensitive circuitry from the mains, while the carefully chosen power supply ensures stable delivery under load.
The casework is all aluminium, with an extruded front panel to control resonance and stray electromagnetic fields. This robust, non-magnetic enclosure contributes to the characteristic Exposure clarity, and the choice of black or titanium finishes lets the amplifier blend seamlessly into both traditional and contemporary interiors.
A dedicated headphone output on the front panel gives you late-night listening without compromising quality, specified to deliver up to 4.8V RMS into 33 ohms (around 700mW) with impressively low distortion. For many urban homes, this makes the 3510 a quietly capable audiophile integrated amplifier when loudspeaker use isn’t always possible.
Everyday use, setup and placement
Day-to-day operation is intentionally simple. Clear front-panel controls are complemented by a supplied remote control, keeping the focus on music rather than menus. Once sources are connected to the rear line inputs, you can treat the Exposure 3510 integrated amplifier as the fixed anchor of your system and swap sources freely.
Placement is straightforward: give the amplifier some breathing space above and to the sides, avoid enclosed cabinets with poor ventilation, and keep it on a rigid, stable shelf. As with all high-end integrated amplifiers, leaving a little distance from Wi-Fi routers and power strips can help minimise potential interference.
System matching and pairing suggestions
With 110W per channel and a stable power supply, the Exposure 3510 integrated amplifier partners confidently with a wide range of quality stand-mount or floorstanding loudspeakers rated for 8-ohm operation. Bi-wiring compatible speaker terminals make it easy to explore higher-performance cable configurations if your speakers support them.
The optional MM or MC phono module makes it especially compelling if you’re building a vinyl-centric system and prefer a clean, direct signal path rather than separate phono boxes and extra cabling. Alternatively, specifying the plug-in DAC turns it into a compact hub for network streamers, TVs and digital transports, an appealing route for many people seeking the best British integrated amplifier in India for modern mixed-source systems.
If you later wish to step into Exposure’s separate pre/power combinations, the pre-amp output lets the 3510 act as source and volume controller while handing over power duties to a dedicated power amplifier. This continuity of voicing is ideal for those who value a long-term, upgrade-friendly approach built around the Exposure 3510 integrated amplifier.
About Exposure
Exposure Electronics has built British hi-fi components since the 1970s, designing, engineering and manufacturing its products in Britain with a singular focus on accurate music reproduction. The brand’s philosophy is straightforward: robust engineering on the inside, clean and timeless design on the outside, and performance that favours musical realism over hi-fi showmanship.
From the compact XM components to the 3510 and 5510 series, every model is tuned by a team of passionate audio engineers who care deeply about how music feels over long listening sessions. To explore more models that complement the Exposure 3510 integrated amplifier, visit our dedicated Exposure brand archive page within this site.
Specifications
FAQs
What is the power output of the Exposure 3510 integrated amplifier?
The Exposure 3510 integrated amplifier is specified at 110W RMS per channel at 1kHz into 8-ohm loads, with total harmonic distortion below 0.03% at rated output. This combination of power and measured performance supports confident drive of many loudspeakers in typical domestic rooms, including larger spaces when partnered with appropriately sensitive designs.
Does the Exposure 3510 integrated amplifier include a phono stage or DAC?
The Exposure 3510 integrated amplifier is supplied with six line inputs and an internal slot that can accept either an MM or MC phono module or a plug-in DAC option. Only one of these modules can be fitted at a time, so you choose between an integrated vinyl solution or an onboard digital section depending on your system priorities.
How many inputs and outputs does the Exposure 3510 integrated amplifier provide?
The Exposure 3510 integrated amplifier offers six line-level inputs for analogue sources and a separate pre-amplifier output for feeding external power amplifiers or subwoofers. There is also a dedicated headphone output on the front panel. This combination creates a flexible control centre for varied systems without needing additional switch boxes.
Can I bi-wire my speakers with the Exposure 3510 integrated amplifier?
Yes, the Exposure 3510 integrated amplifier is explicitly described as bi-wiring compatible. This means that, where your loudspeakers are designed for bi-wiring, you can run separate cable pairs to the bass and treble sections from the amplifier’s outputs, potentially improving separation and control when matched with suitable speakers and cabling.
Does the Exposure 3510 integrated amplifier have a headphone output and what are its capabilities?
The Exposure 3510 integrated amplifier includes a dedicated headphone output with an output impedance of less than 12 ohms at 1kHz. It can deliver approximately 4.8V RMS (around 700mW) into 33-ohm headphones with very low distortion, and also supports higher-impedance designs at lower power levels, making it practical for many quality headphones.
What are the dimensions and weight of the Exposure 3510 integrated amplifier?
The Exposure 3510 integrated amplifier measures approximately 115mm high, 440mm wide and 300mm deep, with a net weight of around 12kg and a gross shipping weight of about 14kg. These proportions make it easy to place on standard hi-fi racks, while the substantial weight reflects the amplifier’s power supply and all-aluminium casework.
